Instrument an
d
control functions
6-8
6
This display shows the average fuel
consumption since it was last reset.
The average fuel consumption display
can be set to either “km/L” or “L/100
km”.
“km/L”: The average distance that
can be traveled on 1.0 L of fuel is
shown.
“L/100 km”: The average amount
of fuel necessary to travel 100 km
is shown.
To switch between the average fuel
consumption display settings, push
the “RESET/SELECT” button for one
second.
To reset the average fuel consumption,
push the “RESET/SELECT” button for
at least one second.
TIP
After resetting the average fuel con-
sumption, “_ _._” will be shown until
the vehicle has traveled 0.1 km (0.06
mi).
The
b
attery volta
g
e in
d
icator
This indicator shows the current
charge state of the battery.
Over 12.8 V Full charge
Under 12.7 V Charging is required.
TIP
If the battery voltage is less than 9.0 V,
“_ _._” will be displayed.
Backli
g
ht settin
g
mo
d
e
To enter the backlight setting mode,
the vehicle must be stopped. First,
push the “RESET/SELECT” button to
change the multi-function display to
show the current backlight setting “bL-
01”, “bL-02”, or “bL-03”. Then push
the “RESET/SELECT” button for two
seconds to enter the backlight setting
mode. Next, push the “RESET/SE-
LECT” button to select the desired
backlight setting. Lastly, push the “RE-
SET/SELECT” button for two seconds
to confirm the setting and exit the
backlight setting mode.
1. Battery voltage display
1
1. Backlight setting mode
1
UB4HEZE0.book Page 8 Wednesday, March 21, 2018 2:58 PM