KX-E100
6
1. Before adjustment
●
Since head magnetization, dust accumulations, etc. are
likely to introduce error in the various characteristics, it
is very important that the heads are properly
demagnetized and cleaned.
●
Make adjustments of mechanical system, playback
system and recording system in that order.
●
Except for azimuth adjustment, adjust in the forward
direction.
2. Instruments required
●
Audio frequency oscillator
●
ACVM or dual channel (ACVM)
●
DCVM
●
Wow/flutter meter
●
Oscilloscope
●
Frequency counter
●
Torque meter
TW-2111A (TX911580) ... Take up/back tension (FWD)
TW-2121A (TX911570) ... Take up/back tension (RVS)
CT-160L (TX911120) ...................................... FF/REW
3. Test tape required
●
MTT-111N (TX911650) .......................... Normal speed
●
MTT-114N (TX911680) .................................... Azimuth
●
MTT-212N (TX911660) .......................... Playback level
●
MTT-256 (TX911300) ................... Playback frequency
response (Normal)
●
MTT-356 (TX911310) ................... Playback frequency
response (CrO
2
)
●
Reference tape
Type I/Normal (LH) ............... TDK AC225 (VU167200)
Type II/High (CrO2) ............... TDK AC514 (VU167300)
Type IV/METAL ..................... TDK AC713 (VU167400)
■
ADJUSTMENTS
TEST MODE (Operation and Display Check)
Enter the TEST MODE by pressing the STANDBY/ON key while pressing the STOP key and FF key when the power is OFF.
NO.
KEY
FUNCTION
ACTION
1
PLAY
PLAY
Playback mode without the cassette tape. In this mode, cleaning
the REC/PB head.
2
STOP
STOP
Stop the playback mode.
3
DIRECTION
DIRECTION
Change the playback direction.
4
FF
DIMMER
Dimmed display when pressing the FF key. (6 step)
5
REW
PHOTO MODE
Photograph mode.
6
DOLBY NR
All display segments lit.
7
REC/PAUSE
Version
Display the program version and date when pressing the REC/
PAUSE key.
8
MODE
Display grid and segments short/open check. (Fig. A is OK)
9
COUNTER RESET
EXIT
To escape the TEST MODE.
10
POWER
EXIT
To escape the TEST MODE and power off.
Fig. A
DISPLAY (Light the all segment)
DISPLAY CHECK (Light a segment of each grid)
