18
30°
30°
SINGLE DECK
INTRO SCAN
DOUBLE DECK
DUBBING
DECK A/B
DIR A
DIR B
COUNTER
RESET
PLAY
SEARCH
REC/PAUSE
REC MUTE
STOP
RKX1
s
¤
‹
!
!
⁄
⁄
With the optional remote control transmitter RKX1, you can
operate this unit at your listening position. For details,
refer to the instruction manual supplied with the remote
control transmitter.
REMOTE CONTROL OPERATION RANGE
Remote sensor
MAINTENANCE
DEMAGNETIZATION
After 20-30 hours of use, enough residual magnetism will
build up on the heads to cause poor high frequency
reproduction. At this time you should use a commercially
available head demagnetizer.
÷
When cleaning the tape path or demagnetizing the
heads, be sure to follow carefully the instructions of the
concerning materials such as cleaning fluid or head
demagnetizer.
OPENING AND CLOSING THE SUB PANEL
OPTIONAL REMOTE CONTROL TRANSMITTER
To open the sub panel
To close the sub panel
Pinch roller
Head
CLEANING OF THE TAPE PATH
Continued high quality performance of your deck is
dependent upon periodic cleaning of the heads, capstan,
pinch roller, and all surfaces over which the tape travels.
Normal use will cause an accumulation of dirt and dust on
the heads, capstans, and pinch rollers. This can lead to
poor sound quality, drop outs (intervals with no sound),
unsteady tape speed, loss of high frequency response,
etc.
Thus, clean the heads and all surfaces over which the
tape travels with a commercially available cleaning
cassette and fluid type cleaner.
Inside of the cassette compartment
7 m (23 feet)
Capstan
Capstan
Pinch roller
