Yamaha KODIAK ULTRAMATIC YFM400FWAN 2000 Owner'S Manual Download Page 167

Page: 167 / 184

9-2

DATA_Disk:KAYO_DATA:HM00B060_YFM400FWA-11:English:E-9.frame

6. Clean the seat with a vinyl upholstery

cleaner to keep the cover pliable and
glossy.

7. Automotive type wax may be applied

to all painted and chrome plated sur-
faces. Avoid combination cleaner-
waxes. Many contain abrasives which
may mar the paint or protective finish.
When finished, start the engine and let
it idle for several minutes.

WARNING

POTENTIAL HAZARD

Operation with wet brakes after wash-
ing.

WHAT CAN HAPPEN

Wet brakes may have reduced stopping
ability, increasing the chance of an acci-
dent.

HOW TO AVOID THE HAZARD

Test the brakes after washing. Apply
the brakes several times at slow speeds
to let friction dry out the linings.

Summary of Contents for KODIAK ULTRAMATIC YFM400FWAN 2000

























































































































































































Search results

Summary of Contents for KODIAK ULTRAMATIC YFM400FWAN 2000

Reviews:

Related manuals for KODIAK ULTRAMATIC YFM400FWAN 2000

Brands by name

Popular brands

Yamaha KODIAK ULTRAMATIC YFM400FWAN 2000, Owner'S Manual

Search results

Summary of Contents for KODIAK ULTRAMATIC YFM400FWAN 2000

Reviews:

Related manuals for KODIAK ULTRAMATIC YFM400FWAN 2000

Brands by name

Popular brands