9-26
9
5. Refill with the recommended final gear oil to
the brim of the check hole as shown.
NOTICE:
Be sure no foreign material en-
ters the final gear case.
[ECB00422]
6. Check the oil level check bolt gasket and the
oil filler bolt gasket for damage, and replace
them if necessary.
7. Install the oil level check bolt, the oil filler bolt
and their gasket, and then tighten the bolts to
the specified torques.
8. Check the final gear case for oil leakage. If oil
is leaking, check for the cause.
EBU23429
Differential gear oil
The differential gear case must be checked for oil
leakage before each ride. If any leakage is found,
have a Yamaha dealer check and repair the ATV.
In addition, the differential gear oil level must be
checked and the oil changed as follows at the in-
tervals specified in the periodic maintenance
chart.
Tightening torque:
Final gear oil drain bolt:
23 N·m (2.3 kgf·m, 17 lb·ft)
1. Final gear oil
2. Gasket
3. Final gear oil level check bolt
4. Correct oil level
Recommended final gear oil:
See page 11-1.
1
2
4
3
Tightening torques:
Final gear oil level check bolt:
10 N·m (1.0 kgf·m, 7.4 lb·ft)
Final gear oil filler bolt:
23 N·m (2.3 kgf·m, 17 lb·ft)
UB5K13E0.book Page 26 Thursday, August 19, 2021 2:35 PM
