9-60
9
4. Remove the burnt-out bulb.
5. Place a new bulb into position.
NOTICE:
Do
not touch the glass part of the bulb. Oil
from your fingers or other contamination
will adversely affect the transparency of
the glass, luminosity of the bulb, and bulb
life. Thoroughly clean off any dirt and fin-
gerprints using a cloth moistened with al-
cohol or thinner.
[ECB00653]
6. Install the socket by pushing it in and turning
it clockwise.
7. Install the bulb cover and the cover at the rear
of the headlight.
NOTICE:
Make sure the
bulb cover is securely fitted over the sock-
et and seated properly.
[ECB03320]
8. Adjust the headlight beam if necessary.
Handlebar-mounted light bulb (YFM70KPAN /
YFM70KPHN / YFM70KPSN)
1. Remove the handlebar-mounted light cover
by removing the quick fasteners.
2. Remove the bulb cover by pulling it off.
1. Do not touch the glass part of the bulb.
1. Handlebar-mounted light cover
2. Quick fastener
1
2
2
UB5K13E0.book Page 60 Thursday, August 19, 2021 2:35 PM
