Yamaha KODIAK 450 2021 Owner'S Manual Download Page 165

Page: 165 / 172

11-5

Ignition system:

TCI

Charging system:

AC magneto

Battery:

Model:

YTX20L-BS

Voltage, capacity:

12 V, 18.0 Ah

Lights:

Headlight:

T19L, 30.0 W/30.0 W

Handlebar-mounted light:

T15H, 35.0 W/36.5 W (YFM450FWBD)

Brake/tail light:

21.0 W/5.0 W

Meter lighting:

LED

Neutral indicator light:

LED

Reverse indicator light:

LED

Coolant temperature warning light:

LED

Park indicator light:

LED

Four-wheel-drive indicator light:

LED

Engine trouble warning light:

LED

Differential gear lock indicator light:

LED (YFM450FWBD)

EPS warning light:

LED (YFM450FWBD)

Fuses:

Main fuse:

40.0 A

Headlight fuse:

15.0 A

Signaling system fuse:

10.0 A

Ignition fuse:

10.0 A

Auxiliary DC jack fuse:

10.0 A

Fuel injection system fuse:

10.0 A

Four-wheel-drive motor fuse:

10.0 A (YFM450FWBD)
3.0 A (YFM450FWB)

Radiator fan motor fuse:

20.0 A

EPS fuse:

40.0 A (YFM450FWBD)

EBU30403

Noise and vibration levels statement (for Eu-
rope)

The figures quoted are emission levels and are not
necessarily safe working levels. Whilst there is a
correlation between the emission and exposure

UBEY60E0.book Page 5 Monday, July 27, 2020 10:46 AM

Summary of Contents for KODIAK 450 2021













































































































































































Search results

Summary of Contents for KODIAK 450 2021

Reviews:

Yamaha KODIAK 450 2021, Owner'S Manual, Page: 165 / 172

Search results

Summary of Contents for KODIAK 450 2021

Reviews: