12
En
REMOTE CONTROL
2. Loading a battery
The life of the battery used in the remote control is about
half a year under normal use. Remove the battery if the
remote control is not used for an extended period. When
the battery becomes weak, replace with a new CR2025
battery.
To replace the battery:
1. Using a small screwdriver, carefully slide out the
battery holder.
2. Remove the expired battery, and place the new
CR2025 battery onto the battery holder with the + side
facing up.
3. Slide the battery holder into the remote control, and
push it so that it clicks shut.
Improper use of batteries may cause a risk of battery
leakage and explosion.
Adhere to the following guidelines:
• Do not attempt to recharge the old battery.
• Insert a battery so that the positive (+) and negative (–)
poles are positioned as shown.
• Even if the shapes are the same, the voltage of batteries
may vary depending on the models. Be careful not to
use different model of battery.
• Dispose of the old battery in accordance with local
regulations.
+ side up
