8
4
STEREO/PARALLEL/BRIDGE switch
Use this switch to select the operating mode.
• STEREO mode
Channels A and B operate independently (as with a conven-
tional stereo amplifier). The Channel A input goes to the Chan-
nel A output jacks, and the Channel B input goes to the
Channel B output jacks.
• PARALLEL mode
The Channel A input signal is output through both the Channel
A and Channel B output jacks. The Channel B input jacks do
not function. Channel A and B volumes can be independently
adjusted.
• BRIDGE mode
The Channel A input signal is output from the BRIDGE output
jacks. To adjust the volume, you must use the Channel A vol-
ume control knob.
5
SPEAKER jacks
Neutrik NL4FC Speakon output connectors,
5-way binding post output jacks,
Phone output jacks
For minimum speaker impedenance values, see page 9.
6
GND terminal
This is a screw-type ground terminal. If you are having a prob-
lem with hum or noise, use this terminal to connect to ground
or to connect to the chassis of the mixer, preamp, or other
device in your system.
