background image

2

Thank you for purchasing the YAMAHA stereo cassette deck.

SAFETY INSTRUCTIONS

7

Wall or Ceiling Mounting — The appliance should be

mounted to a wall or ceiling only as recommended by the
manufacturer.

8

Ventilation — The appliance should be situated so that

its location or position does not interfere with its proper
ventilation. For example, the appliance should not be
situated on a bed, sofa, rug or similar surfaces that may
block the ventilation openings: or placed in a built-in
installation, such as a bookcase or cabinet that may impede
the flow of air through the ventilation openings.

9

Heat — The appliance should be situated away from

heat sources such as radiators, stoves, or other appliances
that produce heat.

10

Power Sources — The appliance should be connected

to a power supply only of the type described in the
operating instructions or as marked on the appliance.

11

Power-Cord Protection — Power-supply cords should

be routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
attention to receptacles, and the point where they exit from
the appliance.

12

Cleaning — The appliance should be cleaned only as

recommended by the manufacturer.

13

No Use Periods — The power cord of the appliance

should be unplugged from the outlet when left unused for a
long period of time.

14

Object and Liquid Entry — Care should be taken so

that objects do not fall into and liquids not spilled into the
inside of the appliance.

15

Damage Requiring Service — The appliance should be

serviced by qualified service personnel when:

A.

The power-supply cord or the plug has been damaged;
or

B.

Objects have fallen, or liquid has been spilled into the
appliance; or

C.

The appliance has been exposed to rain; or

D.

The appliance does not appear to operate normally or
exhibits a marked change in performance; or

E.

The appliance has been dropped, or the cabinet
damaged.

16

Servicing — The user should not attempt to service the

appliance beyond those means described in the operating
instructions. All other servicing should be referred to
qualified service personnel.

17

Grounding or Polarization — The precautions should be

taken so that the grounding or polarization of an appliance
is not defeated.

CAUTION

The apparatus is not disconnected from the AC power
source as long as it is connected to the wall outlet,
even if the apparatus itself is turned off.

÷

Explanation of Graphical Symbols

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert you to the presence of

uninsulated “dangerous voltage” within the product's

enclosure that may be of sufficient magnitude to constitute a

risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert you to the presence of important operating

and maintenance (servicing) instructions in the literature

accompanying the appliance.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING
To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.

1

Read Instructions — All the safety and operating

instructions should be read before the appliance is
operated.

2

Retain Instructions — The safety and operating

instructions should be retained for future reference.

3

Heed Warnings — All warnings on the appliance and in

the operating instructions should be adhered to.

4

Follow Instructions — All operating and other instructions

should be followed.

5

Water and Moisture — The appliance should not be used

near water — for example, near a bathtub, washbowl,
kitchen sink, laundry tub, in a wet basement, or near
swimming pool, etc.

6

Carts and Stands — The appliance should be used only

with a cart or stand that is recommended by the
manufacturer.

6A

An applicance and cart

combination should be moved with
care. Quick stops, excessive force,
and uneven surfaces may cause the
appliance and cart combination to
overturn.

CAUTION:  TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.

Summary of Contents for K-902



















Reviews: