En
11
Preparations
Engl
ish
1
Attach the cover.
•
When using an outdoor antenna or connecting to
the AUX jack, the cover may not be able to be
attached. In that case, you can use the unit
without the cover.
2
Attach the non-skid pad to the rear of
the unit (2 places).
3
Insert a screw into the wall.
•
Prepare a commercially available tapping screw (screw
diameter 3.5 mm to 4 mm (1/8 in. to 3/16 in.)).
•
Do not mount the unit on thin plywood or on a wall
made of soft material. Otherwise, the screw may pull
out of the surface and the unit may fall, possibly
damaging it or causing personal injury.
•
Do not mount the unit on a wall using nails,
adhesives, or unstable hardware. Long term use
and vibration may cause the unit to fall.
Continue to the next page
\
When hanging the unit on the wall
•
Secure installation is the owner's responsibility. Yamaha shall not be liable for any accident caused by improper
installation. If you are uncertain about the wall strength, please consult an installation specialist.
3
1
2
10 mm (13/32 in.)
Wall/
Reinforcing
material
20 mm (13/16 in.) or more
