49
En
Operating various settings for this unit (Setup menu)
English
INTR
ODUCTION
AD
DITIONAL
INFORMA
T
ION
APPENDIX
PRE
P
ARA
T
ION
BA
S
IC
OPERA
T
ION
AD
V
ANCED
OPERA
T
ION
You can set various items for sound outputs.
■
Dynamic Range
Selects the dynamic range adjustment method for
reproducing bitstream signals.
■
Lipsync
Adjusts delay between video output and audio output.
This unit automatically adjusts the delay (automatic
lipsync) when a TV that supports the automatic lipsync is
connected to the HDMI OUT 1 or HDMI OUT 2 jack of
this unit and HDMI signals are output only from the
corresponding HDMI OUT jack.
HDMI OUT1
Displays the delay time adjusted by automatic lipsync for
HDMI signals output from the HDMI OUT 1 jack. To fine
adjust the delay time, set an offset time in the “Offset”
field. This offset time is also applied to the signals output
from the HDMI OUT 2 jack when both the HDMI OUT 1
and HDMI OUT 2 jacks are active.
HDMI OUT2
Displays the delay time adjusted by automatic lipsync for
HDMI signals output from the HDMI OUT 2 jack. To fine
adjust the delay time, set an offset time in the “Offset”
field.
ANALOG MONITOR OUT
Adjusts the delay time applied when only the analog
MONITOR OUT (COMPONENT VIDEO or VIDEO)
jacks are used.
You can set various items for HDMI and display.
You can set items for HDMI.
■
HDMI Control
Selects on or off of the HDMI control function when a
component that supports the HDMI control function is
connected to the HDMI OUT 1 jack of this unit. When this
parameter is set to “On”, this unit output signals input
from the HDMI 1-4 jacks or HDMI IN (VIDEO AUX)
jack to the video monitor even when this unit is on
standby.
y
•
The
B
HDMI THROUGH
indicator lights up in the following cases
while this unit is on standby.
–
when the HDMI control function is on
–
when the HDMI signal standby-through function is currently working
•
When “HDMI Control” is set to “On”, this unit consumes 1 to 3 watts of
power depending on a condition of an HDMI signal passing through this
unit.
■
Standby Through
Selects on or off of output of HDMI signals input from the
HDMI 1-4 jacks or HDMI IN (VIDEO AUX) jack to the
active HDMI OUT jack(s) when this unit is on standby.
When this parameter is set to “On”, this unit output signals
input from the HDMI 1-4 jacks or HDMI IN (VIDEO
AUX) jack to the video monitor(s) even when this unit is
on standby.
y
•
This parameter is not available when “HDMI Control” is set to “On”.
•
To enables HDMI signal standby-through output, any one of the input
sources connected to the HDMI 1-4 jacks or HDMI IN (VIDEO AUX)
jack must be selected before switching to standby.
•
When “Standby Through” is set to “On”, the
B
HDMI THROUGH
indicator lights up. In this state, the amount of power consumption in the
standby mode increases.
■
Audio Output
Selects this unit or a component connected to the HDMI
OUT 1 jack of this unit for reproducing sound signals
input from the HDMI 1-4 jacks or HDMI IN (VIDEO
AUX) jack.
Sound Setup
Choices:
Min/Auto, STD, Max*
Min/Auto
(Min) Sets the dynamic range suitable for
low volume or a quiet environment, such as
at night, for bitstream signals except for
Dolby TrueHD signals.
(Auto) Adjusts the dynamic range for Dolby
TrueHD signals based on input signal
information.
STD
Sets the standard dynamic range
recommended for regular home use.
Max
Outputs sound without adjusting the
dynamic range of the input signals.
Adjustable range:
0* to 240ms (1 ms step)
Adjustable range:
0* to 240ms (1 ms step)
Adjustable range:
0* to 240ms (1 ms step)
Function Setup
HDMI
Choices:
On, Off*
On
Enables the HDMI control function.
Off
Disables the HDMI control function.
Choices:
On, Off*
On
Outputs the HDMI signals to the active
HDMI OUT jack(s)
Off
Not output the HDMI signals to the HDMI
OUT 1/2 jacks.
Choices:
Amplifier*, TV, Amp TV
Amplifier
Outputs HDMI sound signals form the
speakers connected to this unit.
