86
En
Customizing this unit (MANUAL SETUP)
Start pairing
START PAIRING
Use this feature to start pairing the connected Yamaha
Bluetooth adapter (such as YBA-10, sold separately) with
your Bluetooth component. For details about the pairing,
refer to “Pairing the Bluetooth™ adapter and your
Bluetooth™ component” on page 62.
1
Press
9
ENTER
to start pairing.
The connected Bluetooth adapter starts searching
Bluetooth components. “Searching...” appears in the
video monitor.
2
Check that the Bluetooth component detects
the Bluetooth adapter.
If the Bluetooth component the Bluetooth adapter,
“YBA-10 YAMAHA” (example) appears in the
Bluetooth device list.
3
Select the Bluetooth adapter in the Bluetooth
device list and then enter the pass key
“0000” on the Bluetooth component.
Once this unit completes the pairing successfully,
“Pairing completed” appears.
y
To cancel the pairing, press
0
RETURN
to exit from
“START PAIRING”.
4
Press
0
RETURN
to exit from “START
PAIRING”.
• If the connected Bluetooth adapter cannot find any Bluetooth
components, “Not found” appears.
• If a Bluetooth adapter is not connected to this unit, “No
Bluetooth Adapter” appears.
Multi-channel input BGV
BGV
Use this feature to select the video source played in the
background of the sources input at the MULTI CH INPUT
jacks.
Input channels
INPUT CH
Use this setting to select the number of channels input
from an external decoder (see page 25).
Choices:
6CH
, 8CH
If the connected component outputs discrete
6-channel audio signals.
Select “6CH”.
If the connected component outputs discrete
8-channel audio signals.
Select “8CH”. Also set “FRONT” (see below) to the
analog audio jacks at which the front left and right
channel signals output from the connected component
are input.
Front left and right channels input jack
FRONT
If you selected “8CH” in “INPUT CH”, you can select the
analog audio jacks at which the front left and right channel
signals output from the connected external decoder is
input.
Choices: CD, MD/CD-R,
DVD
, DTV/CBL, DVR, VCR,
V-AUX
“FRONT” parameter appears only when you set “INPUT CH” to
“8CH”.
To ensure security, a time limit of 8 minutes is set for
the pairing operation. You are recommended to read
and fully understand all the instructions before starting.
Notes
[]/[]:
[ENTER]:
[
p
L)MULTI CH
INPUT RENAME
VOL. TRIM
;;;;;
0.0dB
BGV
;;;;;;;;;;;;
LAST
INPUT CH
;;;;;;;;
6CH
Up/Down
Select
.
Choice
Functions
LAST
Automatically selects the last selected video
source as the background video source.
DVD, DTV/
CBL, DVR,
VCR, V-AUX
Selects the corresponding input source as the
background video source.
OFF
Does not play the video source in the
background.
Note
[]/[]:
[ENTER]:
[
p
L)MULTI CH
INPUT RENAME
VOL. TRIM
;;;;;
0.0dB
BGV
;;;;;;;;;;;;
LAST
INPUT CH
;;;;;;;;
6CH
Up/Down
Select
.
[]/[]:
[ENTER]:
[
p
L) MULTI CH
INPUT RENAME
VOL. TRIM
;;;;;
0.0dB
BGV
;;;;;;;;;;;;
LAST
INPUT CH
;;;;;;;;
8CH
FRONT
;;;;;;;;;;;
DVD
Up/Down
Select
.
