CONFIGURATIONS
➤
Configuring various functions (Setup menu)
En
94
Sound
Configures the audio output settings.
■
Lipsync
Adjusts the delay between video and audio output.
❑
Delay Enable
Enables/disables the Lipsync adjustment for each input source.
Choices
HDMI 1–5, AV 1–6, AUDIO 1–2
Settings
❑
Auto/Manual Select
Selects the method to adjust the delay between video and audio output.
Setting range
• “Auto/Manual Select” is automatically set to “Manual” depending on the TV connected to the unit.
❑
Adjustment
Adjusts the delay between video and audio output manually when “Auto/Manual
Select” is set to “Manual”. You can fine-adjust the audio output timing when
“Auto/Manual Select” is set to “Auto”.
Setting range
0 ms to 500 ms (1 ms increments)
Default
0 ms
• “Offset” shows the difference between automatic adjustment and fine adjustment.
■
Dynamic Range
Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and
DTS signals) playback.
Settings
■
Max Volume
Sets the maximum volume to prevent excessive loudness.
Setting range
-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB
Default
+16.5 dB
Disable
Disable the Lipsync adjustment for the selected input source.
Enable (default)
Enables the Lipsync adjustment for the selected input source.
Auto (default)
Adjusts the delay between video and audio output automatically when
a TV that supports an automatic lipsync function is connected to the
unit via HDMI.
If necessary, you can fine-adjust the audio output timing in
“Adjustment”.
Manual
Select this option when you want to adjust the delay between video
and audio output manually.
Adjust the audio output timing in “Adjustment”.
Maximum (default)
Produces audio without adjusting the dynamic range.
Standard
Optimizes the dynamic range for regular home use.
Minimum/Auto
Sets the dynamic range for clear sound even at night or at low
volumes.
When playing back Dolby TrueHD signals, the dynamic range is
automatically adjusted based on the input signal information.
