Yamaha HTR-5940, Owner'S Manual

Page: 137 / 169

8
1
POWER switch
Press this switch to the ON position to turn on the
power to the subwoofer. When the power of the
subwoofer is on, the power indicator (
4
) on the rear
panel light up in green. Press this switch again to set it
to
OFF position to turn off the power of the subwoofer.
2
OUTPUT (TO SPEAKERS) terminals
Can be used for connecting to the front speakers.
Signals from the
INPUT 1
terminals are sent to these
terminals.
(Refer to “
CONNECTIONS ” for details.)
3
VOLUME control
Adjusts the volume level. Turn the control clockwise to
increase the volume, and counterclockwise to decrease
the volume.
4
Power indicator
Light up in green when the power switch (
1
) is turned
on; turns off when the power switch is turned off.
5
HIGH CUT switch
Selects the high frequency cut off point. Normally, it is
set to
LOW , however, you may set to HIGH if
necessary. (Refer to page 9)
6
INPUT 2 terminals
Used to input line level signals from the amplifier.
(Refer to “
CONNECTIONS
” for details.)
7
INPUT 1 (FROM AMPLIFIER) terminals
Used to connect the subwoofer with the speaker
terminals of the amplifier.
(Refer to “
CONNECTIONS ” for details.)
CONTROLS AND THEIR FUNCTIONS
POWER
VOLUME
OUTPUT
TO SPEAKERS
INPUT
2
/MONO
HIGH LOW
HIGH
CUT
INPUT 1
FROM AMPLIFIER
ON
OFF
/MONO
HIGH LOW
HIGH
CUT
INPUT 1
FROM AMPLIFIER
INPUT
2
OUTPUT
TO SPEAKERS
1
3 4
7
6 5
2
VOLUME
Subwoofer rear panel