manualshive.com logo in svg

Yamaha htr-5890, Owner'S Manual

The Yamaha HTR-5890 is a cutting-edge home theater receiver designed to deliver immersive audio experiences. Unlock the full potential of this exceptional device by downloading the Owner's Manual for free from our website. This comprehensive manual provides all the necessary instructions to optimize your audio setup and maximize your enjoyment.

Share
Download
background image

SPECIFICATIONS

95

ADDITIONAL 

INFO

RMA

T

IO
N

AUDIO SECTION

• Minimum RMS Output Power for Front, Center, Surround, 

Surround back

20 Hz to 20 kHz, 0.04% THD, 8 

Ω

..................................... 120 W

1 kHz, 0.7% THD, 8 

Ω

........................................................ 140 W

• Dynamic Power (IHF)

8/6/4/2 

Ω

 .........................................................155/195/250/330 W

• Damping Factor (IHF)

20 Hz to 20 kHz, 8 

Ω

................................................... 140 or more

• Frequency Response

CD to Front L/R ..................................... 10 Hz to 100 kHz, –3 dB

• Total Harmonic Distortion

PHONO to REC OUT (20 Hz to 20 kHz, 1 V)  ..................  0.02%
CD, etc. to Front L/R (20 Hz to 20 kHz, 60 W, 8 

Ω)

..........  0.04%

• Signal to Noise Ratio (IHF-A Network)

PHONO (5 mV) to Front L/R................................................ 86 dB
CD (250 mV) to Front L/R, Effect Off................................ 100 dB

• Residual Noise (IHF-A Network)

Front L/R  ...............................................................  150 µV or less

• Channel Separation (1 kHz/10 kHz)

PHONO (terminated) to Front L/R ...........................  60 dB/55 dB
CD (5.1 k

Ω

 terminated) to Front L/R .......................  60 dB/45 dB

• Tone Control (Front L/R)

BASS Boost/Cut  .......................................................  ±6 dB/50 Hz
BASS Turnover Frequency.................................................. 350 Hz
TREBLE Boost/Cut ................................................  ±6 dB/20 kHz
TREBLE Turnover Frequency...........................................  3.5 kHz

• Phones Output ..........................................................  150 mV/100 

Ω

• Input Sensitivity/Input Impedance

PHONO ..................................................................  3.5 mV/47 k

Ω

CD, etc.  .................................................................  200 mV/47 k

Ω

MULTI CH INPUT ...............................................  200 mV/47 k

Ω

• Output Level/Output Impedance

REC OUT .............................................................  200 mV/1.2 k

Ω

PRE OUT ................................................................... 1.0 V/500 

Ω

SUBWOOFER ........................................................... 2.0 V/500 

Ω

ZONE 2 OUTPUT..................................................... 1.0 V/1.2 k

Ω

ZONE 3 OUTPUT..................................................... 1.0 V/1.2 k

Ω

VIDEO SECTION

• Video Signal Type .................................................................... NTSC

• Signal to Noise Ratio  .............................................................. 60 dB

• Frequency Response (MONITOR OUT)

Composite, S-video................................... 5 Hz to 10 MHz, –3 dB
Component  ............................................... 5 Hz to 60 MHz, –3 dB

FM SECTION

• Tuning Range  ..................................................... 87.5 to 107.9 MHz

• Usable Sensitivity (IHF) ....................................... 1.0 µV (11.2 dBf)

• Signal to Noise Ratio (IHF)

Mono/Stereo .............................................................. 76 dB/70 dB

• Harmonic Distortion (1 kHz)

Mono/Stereo ................................................................  0.2%/0.3%

• Stereo Separation (1 kHz)  ....................................................... 42 dB

• Frequency Response ........................... 20 Hz to 15 kHz +0.5, –2 dB

AM SECTION

• Tuning Range  ........................................................  530 to 1710 kHz

• Usable Sensitivity ............................................................. 300 µV/m

GENERAL

• Power Supply .........................................................  AC 120 V/60 Hz

• Power Consumption ..................................................  500 W/630 VA

• Standby Power Consumption ......................................  0.5 W or less

• AC Outlets....................................  2 (Total 100 W/0.8 A maximum)

• Dimensions (W x H x D) .................................  435 x 171 x 424 mm

(17-1/8” x 6-3/4” x 16-11/16”)

• Weight  .................................................................. 15.0 kg (33.1 lbs)

SPECIFICATIONS

01EN00_HTR5890U.book  Page 95  Thursday, December 23, 2004  12:39 PM

Summary of Contents for htr-5890









































































































Reviews:

No comments

Related manuals for htr-5890

Abilia Andromeda Faq Manual preview
Andromeda
Brand: Abilia Pages: 6
NAD 402 Service Manual preview
402
Brand: NAD Pages: 20
Jensen VX7014 Operation Manual preview
VX7014
Brand: Jensen Pages: 98
Icom IC-F62D Operating Manual preview
IC-F62D
Brand: Icom Pages: 125
D+M Group DENON AVR-X4000W Model Information preview
DENON AVR-X4000W
Brand: D+M Group Pages: 21
Aiwa FR-C20 Service Manual preview
FR-C20
Brand: Aiwa Pages: 10
Navman VHF 7000 Owner'S Manual preview
VHF 7000
Brand: Navman Pages: 54
JBL MR-160 Operation Manual For User preview
MR-160
Brand: JBL Pages: 7
BW Broadcast RBRX1 Preliminary Manual preview
RBRX1
Brand: BW Broadcast Pages: 23
OEM TY-6300SD Operation Manual preview
TY-6300SD
Brand: OEM Pages: 58
Icom IC-F3260 Series Instruction Manual preview
IC-F3260 Series
Brand: Icom Pages: 40
NAITS Kid Guard User Manual preview
Kid Guard
Brand: NAITS Pages: 3
Audiovox VME 9425 Owner'S Manual preview
VME 9425
Brand: Audiovox Pages: 192
SilverStone QIR01-L Manual preview
QIR01-L
Brand: SilverStone Pages: 2
Sangean WR-1CL User Manual preview
WR-1CL
Brand: Sangean Pages: 52
Jensen CDR171 Installation & Owner'S Manual preview
CDR171
Brand: Jensen Pages: 28
GAMA Electronics RF340-4PR-ASL-NIS Instruction Manual preview
RF340-4PR-ASL-NIS
Brand: GAMA Electronics Pages: 5
Jensen MP7610 Quick Start Manual preview
MP7610
Brand: Jensen Pages: 2

Brands by name

Popular brands

Load more brands