En
58
■
Signal Info
Displays information on the current video and audio signals.
Input sources
HDMI1-4, AV1-4, and the input source set as a TV audio input when ARC is used
Items
■
Procedure to switch the items on the front display.
1
Press the cursor keys (
/
) to switch the display of information on the front display.
Front display
• The list of all signal information is displayed on a TV monitor.
■
Standby Charge
Sets whether or not to charge an iPod connected to the iPod dock or iPod wireless
audio receiver while the unit is in standby mode.
Input sources
DOCK (iPod)
Settings
• When iPod is connected to the unit with a USB cable, iPod cannot be charged while the unit is in standby
mode.
Format
(FORMAT)
Audio signal format.
When this unit is unable to detect a digital signal, it automatically
switches to an analog input.
Channel
(CHAN)
The number of source channels in the input signal (front/ surround/
LFE).
For example, “3/2/0.1” means 3 front channels, 2 surround channels
and LFE.
If a channel that cannot be expressed as the above, a total number of
channels such as “5.1ch” may be displayed.
Sampling
(SAMPL)
The number of samples taken per second when converting an analog
signal into a digital signal.
Bitrate
(B RATE)
The number of bits passing a given point per second.
Input
(V IN)
Video input signal format
Output
(V OUT)
Video output signal format.
Message
(V MSG)
Error messages about HDMI. This item appears only when error
concerning HDMI occurs.
HDCP Error (HDCP Error):
The connected TV is not compliant to the High-bandwidth Digital
Content Protection (HDCP). Make sure that the HDCP compliant TV is
connected.
Device Over (Device Over):
The number of devices connected to HDMI OUT jack exceeded the
limitation. Reduce the number of the connected devices.
SW
C
L
SL
SR
R
Dolby D
FORMAT
VOL.
Selected item
Signal information
On (Default)
Charges iPod when the unit is in standby mode.
Off
Does not charge iPod when the unit is in standby mode.
