English
E-
5
䡵
Mounting the front/rear speakers (and rear center speaker for
NS-P116)
Mount the front/rear speakers (and rear center speaker for
NS-P116) on a shelf, rack or directly on the floor, or hang
them on the wall.
To mount the speakers on a wall by
using the holes on the speakers’
back panels
1
Fasten screws into a firm wall or wall support as shown
in the figure.
2
Hang the speaker by mounting the holes on the
protruding screws.
* Make sure that the screws are securely affixed by the
narrow parts of the holes.
WARNING
●
Each speaker weighs 0.9 kg (2 lbs.). Do not mount
them on thin plywood or a wall composed of a soft
surface material. If mounted, the screws may pull out
of the flimsy surface and the speakers may fall. This
may damage the speakers or cause personal injury.
●
Do not affix the speakers to a wall using nails,
adhesives, or any other unstable hardware. Long-
term use and vibrations may cause the speakers to
fall.
●
To avoid accidents resulting from tripping over loose
speaker cables, fix the cables to the wall.
●
Select an appropriate position on the wall to mount
the speaker so that no one will injure his/her head or
face.
1
70 mm
Holes
2
W
all/ wall
support
Tapping screw
(Available at the
hardware store)
Min.
20 mm
Diam. 3.5 to 4 mm
10 mm
70 mm
70 mm
Using the Yamaha Speaker Stand SPS-80 (option)
By using the Yamaha Speaker
Stand SPS-80, speakers can be
placed on the floor.
* The SPS-80 is not available in some areas.
SPS-80
2-NS-P110-116-U.p65
05.3.11, 4:27 PM
5
