Auxiliary Connector
The Auxiliary connector is used to connect additional inputs and outputs to the
installation. Terminations are outlined below.
Auxiliary Connector
Legend- Wire Colours
B=Black
BR=Brown
G=Green
GY=Grey
L=Blue
O=Orange
P=Pink
R=Red
V=Violet
Y=Yellow
W=White
When two Colours are used in a wire by the alphabetical code, the first letter
indicates the basic wire colour, the second colour indicates the colour of the
stripe.
YAMAHA PWC
Quick Startup Guide
Congratulations on purchasing a Haltech Engine Management System.
This
fully programmable
product opens the door to virtually limitless performance
modification and tuning of your vehicle. Programmable systems allow you to extract
all the performance from your engine by delivering precisely the required amount
of fuel and ignition timing that your engine requires for maximum output under all
operating conditions.
This quick startup guide will walk you through installation of a Haltech ECU into a
PWC. This guide is accompanied by the full service manual located on the
software USB provided with the ECU that you or your tuner will need to refer to
before completing your installation and configuration. The Manual can also be
downloaded from the Haltech website
www.haltech.com
Compatibility
The Haltech Elite Yamaha PWC Kit is compatible with the following
Yamaha Waverunner series manufactured after 2008 using the
1.8L High Output Yamaha Marine Engine.
•
FX
•
FZS
•
FZR
Supported ECU's
•
Elite 1500
•
Elite 2500
Included in Haltech Elite Yamaha PWC Kit ( HT-140980)
•
Elite PWC Mounting Bracket and associated installation hardware
•
Plug & Play Patch Harness
•
Auxiliary Connector,Pins,Sealing plugs
•
IP67 USB Extension Cable
•
Screw on USB A Sealing Cap
Optional Accessories ( Sold Separately )
•
Haltech CAN Wideband controller 1 PWC Kit without digital display gauge (HT-010730)
•
Haltech CAN Wideband controller 1 PWC Kit with digital display gauge (HT-010731)