background image

English

10

HS80M/HS50M/HS10W  Owner’s Manual

100° and 120°, as shown in the diagram above. The center speaker should be placed precisely midway between the main 

front speakers, at the same distance from the listening position as the other speakers (which means that ideally it will be a bit 

behind the main left and right speakers.

As you may have deduced by now, the main left and right, center, and rear speakers are all located on the circumference 

of a circle with its center at the listening position. An easy way to get all the distances right is to use a piece of string cut or 

marked to the exact distance between the main left and right speakers. Attach the string to a mic stand or other convenient 

object at the listening position and use it to measure the distance from the listening position to each of the speakers. 

Stretched from the listening position to the speaker position the string will also provide a convenient guide for aligning the 

speakers so that they point directly at the listening position.

MG-series Mixer Setup

If you’re connecting to a standard mixer that is not specifically 

designed for surround production, your main L and R speakers 

can be connected to any convenient stereo output pair via the 

HS10W subwoofer, while the center and rear speakers will be 

connected to individual output channels.

Example: MG16/6FX

Digital Mixer Setup

If you’re connecting your HS-series speakers to a mixing console 

that features built-in surround handling capability — such as the 

Yamaha DM2000, DM1000, or 02R96 — each speaker will be 

connected directly to the console output dedicated to handling 

that particular surround channel. In this type of setup you can take 

full advantage of the console’s advanced surround mixing and bass 

management facilities.

DVD 

Player

Input Channel

Output

Connector

Speaker

L

Ch1 (ST=ON, PAN 

 L)

ST OUT (L)

L

R

Ch2 (ST=ON, PAN 

 R)

ST OUT (R)

R

LS

Ch3 (GRP1-2, PAN 

 L)

GROUP OUT 1(L)

LS

RS

Ch4 (GRP1-2, PAN 

 R)

GROUP OUT 2(R)

RS

C

Ch5 (GRP3-4, PAN 

 L)

GROUP OUT 3

C

LFE

Ch6 (ST=ON, PAN

Center,

Fader

+10 dB Boost)

ST OUT

LFE

DVD Player 

6 Channel Line

LS

RS

LFE

R

L

C

OMNI Out

LS

RS

R

LFE

C

L

Summary of Contents for HS50M - HS 50M Speaker

















Reviews: