Yamaha Harmony Director HD-200, Owner'S Manual

Page: 21 / 164

16
Englis
h
Other Settings
From the display called up via the [SETTING] button, you can
change settings such as foot pedal volume and metronome sound.
Press the [SETTING] button so that its lamp lights to call up the
Setting display, then follow the instructions below.
Foot Pedal Function
You can set the function of the foot pedal connected to the FOOT PEDAL jack.
Press the Note Select
[C] button to move the cursor to the “Foot Pedal” column, then select the desired function
from the following by using the DATA ENTRY dial or [+]/[-] buttons.
Harmony Volume
You can adjust the volume for the entire keyboard.
Press the Note Select
[D] button to move the cursor to the “Harmony Volume” column, then adjust the volume
between -10 and +5 by using the DATA ENTRY dial or [+]/[-] buttons.
Metronome Sound
You can change the beat sound of the metronome.
Press the Note Select
[A] button to move the cursor to the “Metro Sound” column, then select the desired voice
from the following by using the DATA ENTRY dial or [+]/[-] buttons.
Function Display Description
Volume Volume Master volume
Hold Hold [HOLD] button
Start/Stop Start/Stop Start and stop the metronome
Voice Display Description
Peck Peck Same voice as the HD-81 and HD-100
Click Click Sounds like a mechanical metronome
Beep Beep Sounds like an electronic metronome
Foot Pedal: Volume C Metro Sound:Peck
Pattern:All B
A
Balance v1.O3
Low: O
M-L: O Mid: O M-H: O High: O
Eb C# F# G# Bb
D Harmony Volume: O