background image

E-

3

English

Français

Deutsc

h

Svenska

Italiano

Español

Nederlands

9. Never hang from the projector or the ceiling bracket.

Hanging from the projector or the ceiling bracket could cause the projector or the ceiling bracket to fall and
injure someone.

10. Do not install the projector in a location near an air conditioning vent or in a location

subject to vibration.

Such conditions could have an adverse effect on the projector, and could even cause a fire or electric shock.

11. Do not install the projector in a location that is subject to high levels of dust or

humidity.

Dust accumulating inside the projector could cause a short circuit that in turn could cause a fire or electric
shock.

12. Do not install the projector in a location that is exposed to direct sunlight or in a

location that is subject to extreme fluctuations in temperature (such as near an air
conditioner).

Such conditions can cause the projector housing to warp or to become discolored.

13. Do not wipe the exterior of the ceiling bracket with benzene, paint thinner or cleaning

compounds.

Doing so could damage the finish.

14. Special techniques and experience are essential when installing the projector using

this bracket. Request that your dealer arrange to have the equipment installed. The
customer should never attempt to suspend the projector from the ceiling.

Improper installation could cause the ceiling bracket or the projector to fall and injure someone.

15. Once the projector is installed, safety checks should be conducted on a regular basis.

If the projector is used over an extended period of time, screws can become loose and the installation can
become weaker due to the passage of time, vibration, etc.

 11PMT_TOC_E

5/29/1, 9:16 AM

3

Summary of Contents for H15

















Reviews: