GX-500/GX-500VCD
GX-500/VCD
9
Fig. 4
Fig. 5
5. Operation Check of P.C.B. CD/VCD
a. Remove the CD Mechanical Unit.
b. Remove 4 screws (
y
) and then remove the P.C.B. CD/VCD in Fig. 4.
c. Place blocks (at 3 locations) to hold the CD Mechanical Unit horizontally as
shown in the Fig. 5.
d. Connect the Flat Connecting Cable ( CB9 ) and 3 connectors ( CB8, CB7
and CB10 ) in Fig. 4 and Fig. 5.
e. Connect the power plug and turn on the Power Switch.
y
VCD Module
(GX-500VCD only)
CB9
CB8
CB7
CB10
P.C.B. CD/VCD
Block
Block
P.C.B. CD/VCD
Block