8-54
8
3. Remove the battery holding plate by remov-
ing the nuts.
4. Disconnect the negative battery lead first,
then the positive battery lead by removing
their bolt.
NOTICE:
When removing the bat-
tery, the main switch must be off, and the
negative lead must be disconnected be-
fore the positive lead.
[ECB01002]
5. Pull the battery out of its compartment.
NOTICE
ECB00622
Never attempt to open the battery or remove
the battery cell seals, as this would permanent-
ly damage the battery.
To charge the battery
Confirm the recommended charging rate as
specified on the battery itself.
1. Carrier bolt (under the fenders)
2. Carrier bolt (lower)
1
2
2
1
1. Battery holding plate
2. Nut
3. Negative battery lead (black)
4. Positive battery lead (red)
1
2
4
3
UB4F60E0.book Page 54 Wednesday, April 25, 2018 11:52 AM
