Yamaha Grizzly YFM66FAV Owner'S Manual Download Page 33

Page: 33 / 198

4-11

1. Lever
2. On-Command four-wheel drive switch “2WD”/“4WD”

On-Command four-wheel drive switch
“2WD”/“4WD”

To change from 2WD to 4WD, stop the ATV,
and then set the switch to “4WD”. When the
ATV is in 4WD, the 4WD indicator “

” will

come on in the speedometer unit display.
To change from 4WD to 2WD, stop the ATV,
be sure the lever is set to position

, and then

set the switch to “2WD”.

1. Differential gear lock switch “LOCK”/“4WD”
2. Lever

Differential gear lock switch “LOCK”/
“4WD”

To lock the differential gear in 4WD, make sure
the On-Command four-wheel-drive switch is
set to “4WD”, stop the ATV, move the lever to
position

, and then set the switch to “LOCK”.

When the differential gear is locked, the differ-
ential gear lock indicator (“DIFF.LOCK”) light
will come on along with the indicator “

” in

the speedometer unit display.
To release the differential gear lock, stop the
ATV and set the switch to “4WD”.

DIFF.

LOCK

EE.book Page 11 Thursday, March 31, 2005 6:57 PM

Summary of Contents for Grizzly YFM66FAV







































































































































































































Search results

Summary of Contents for Grizzly YFM66FAV

Reviews:

Yamaha Grizzly YFM66FAV, Owner'S Manual, Page: 33 / 198

Search results

Summary of Contents for Grizzly YFM66FAV

Reviews: