manualshive.com logo in svg

Yamaha Grizzly YFM125GW, Owner'S Manual

Share
Download
Yamaha Grizzly YFM125GW Owner'S Manual Download Page 65

 

7-19

 

1

2

3

4

5

6

7

8

9

10

11

 

If you are climbing a hill and you find that you have
not properly judged your ability to make it to the
top, you should turn the ATV around while you still
have forward motion (provided you have the room
to do so) and go down the hill.

 

EWB01190 

WARNING

 

POTENTIAL HAZARD
Improperly crossing hills or turning on hills.
WHAT CAN HAPPEN
Could cause loss of control or cause the ATV
to overturn.
HOW TO AVOID THE HAZARD
Never attempt to turn the ATV around on any
hill until you have mastered the turning tech-
nique as described in the Owner’s Manual on
level ground. Be very careful when turning
on any hill.
Avoid crossing the side of a steep hill if pos-
sible.
When crossing the side of a hill:
Always follow proper procedures as de-
scribed in the Owner’s Manual.
Avoid hills with excessively slippery or loose
surfaces.
Shift your weight to the uphill side of the
ATV.

Summary of Contents for Grizzly YFM125GW



















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands