background image

 

9-3

 

1

2

3

4

5

6

7

8

9

10

11

 

plug, and then place the spark plug on the
cylinder head so that the electrodes are
grounded. (This will limit sparking during
the next step.)

d. Turn the engine over several times with

the starter. (This will coat the cylinder wall
with oil.)

e. Remove the spark plug cap from the spark

plug, and then install the spark plug and
the spark plug cap.

6. Lubricate all control cables and the pivoting

points of all levers and pedals.

7. Check and, if necessary, correct the tire air

pressure, and then block up the ATV so that
all of its wheels are off the ground. Alternative-
ly, turn the wheels a little every month in order
to prevent the tires from becoming degraded
in one spot.

8. Cover the muffler outlet with a plastic bag to

prevent moisture from entering it.

9. Remove the battery and fully charge it. Store

it in a cool, dry place and charge it once a
month. Do not store the battery in an exces-
sively cold or warm place [less than 0 °C (30
°F) or more than 30 °C (90 °F)]. For more in-
formation on storing the battery, see page

8-31.

NOTE:

 

Make any necessary repairs before storing the

 

ATV.

Summary of Contents for Grizzly 80 YFM80GX







































































































































Reviews: