manualshive.com logo in svg

Yamaha GRIZZLY 700 2012, Owner'S Manual, Page: 41 / 174

Share
Download
Yamaha GRIZZLY 700 2012 Owner'S Manual Download Page 41

4-12

4

Stop the ATV, move the differential gear lock lever
to position (a), and then push the differential gear
lock switch in to the “LOCK” position. When the dif-
ferential gear is locked, the differential gear lock in-
dicator light “DIFF. LOCK” will come on along with
the indicator “

” in the multi-function display.

To unlock the differential gear, stop the ATV and
push the switch to the “4WD” position.

TIP

●

When the switch is set to “LOCK” or “4WD”, the
differential gear lock indicator and indicator light
will flash until the differential gear is completely
locked or unlocked.

●

When the indicator and indicator light are flash-
ing, turning the handlebar back and forth will
help the differential gear lock to engage or disen-
gage.

1. Differential gear lock lever

2. On-Command four-wheel-drive switch “2WD”/“4WD”

2WD

4WD

2

1

(a)

1. On-Command differential gear lock switch “4WD”/“LOCK”

LOCK

4WD

1

U1HP61E0.book  Page 12  Thursday, April 5, 2012  3:33 PM

Summary of Contents for GRIZZLY 700 2012















































































































































































Reviews:

No comments