manualshive.com logo in svg

Yamaha Grizzly 450 YFM45FGX, Owner'S Manual, Page: 67 / 182

Share
Download
Yamaha Grizzly 450 YFM45FGX Owner'S Manual Download Page 67

7-5

7

Apparel

WARNING

EWB00920

POTENTIAL HAZARD
Operating this ATV without wearing an ap-
proved motorcycle helmet, eye protection
and protective clothing.
WHAT CAN HAPPEN
Operating without an approved motorcycle
helmet increases your chances of a severe
head injury or death in the event of an acci-
dent.
Operating without eye protection can result
in an accident and increases your chances
of a severe injury in the event of an accident.
Operating without protective clothing in-
creases your chances of severe injury in the
event of an accident.

HOW TO AVOID THE HAZARD
Always wear an approved motorcycle helmet
that fits properly.
You should also wear:

●

eye protection (goggles or face shield)

●

gloves

●

boots

●

long-sleeved shirt or jacket

●

long pants

1. Protective clothing
2. Goggles

3. Gloves

4. Boots
5. Helmet

U17S10E0.book  Page 5  Friday, July 6, 2007  1:37 PM

Summary of Contents for Grizzly 450 YFM45FGX























































































































































































Reviews:

No comments