manualshive.com logo in svg

Yamaha GRIZZLY 350 YFM35GX, Owner'S Manual

The Yamaha GRIZZLY 350 YFM35GX is a powerful all-terrain vehicle designed to tackle any outdoor adventure. Whether you're a seasoned rider or a beginner, this compact and reliable machine offers ultimate comfort and control. For detailed instructions on operating and maintaining your Yamaha GRIZZLY 350 YFM35GX, you can download the free Owner's Manual from our website.

Share
Download
background image

4-12

4

Move the starter (choke) in direction (b) to turn off
the starter (choke).
See the “Starting a cold engine” section on page
6-1 for proper operation.

EBU18880

Seat 

To remove the seat

Pull the seat lock lever upward and pull up the seat
at the rear.

To install the seat

Insert the projections on the front of the seat into
the seat holders and push down on the seat at the
rear.

NOTE:

Make sure that the seat is securely fitted.

1. Starter (choke) “

”

1. Seat
2. Seat lock lever

U5WH64E0.book  Page 12  Friday, April 20, 2007  3:28 PM

Summary of Contents for GRIZZLY 350 YFM35GX







































































































































Reviews:

No comments

Related manuals for GRIZZLY 350 YFM35GX

Brands by name

Popular brands

Load more brands