manualshive.com logo in svg

Yamaha GRIZZLY 350 YFM35GX, Owner'S Manual

The Yamaha GRIZZLY 350 YFM35GX is a powerful all-terrain vehicle designed to tackle any outdoor adventure. Whether you're a seasoned rider or a beginner, this compact and reliable machine offers ultimate comfort and control. For detailed instructions on operating and maintaining your Yamaha GRIZZLY 350 YFM35GX, you can download the free Owner's Manual from our website.

Share
Download
background image

6-1

6

EBU19880

OPERATION

EBU19900

Read the Owner’s Manual carefully before riding
the ATV.

WARNING

EWB00630

Read the Owner’s Manual carefully to become
familiar with all controls in order to help pre-
vent any loss of control, which could cause an
accident or injury. If there is a control or func-
tion you do not understand, ask your Yamaha
dealer.

EBU20031

Starting a cold engine 

WARNING

EWB00640

Always make sure all control cables work
smoothly before you begin riding in cold
weather. If the control cables are frozen or do
not work smoothly, you could be unable to
control the ATV, which could lead to an acci-
dent or collision.

CAUTION:

ECB00150

See the “Engine break-in” section on page 6-4
prior to operating the engine for the first time.

1. Set the parking brake.
2. Turn the fuel cock to “ON”.
3. Turn the main switch to “ON” and the engine

stop switch to “

”.

4. Shift the drive select lever into the neutral po-

sition. The neutral indicator light should come
on. If the indicator light does not come on,
have a Yamaha dealer check the electrical cir-
cuit.

NOTE:

The engine can be started under the following con-
ditions:

●

The drive select lever is in the neutral position.

●

The rear brake lever is applied with the drive se-
lect lever in any position. However, it is recom-
mended to shift into the neutral position before
starting the engine.

U5WH64E0.book  Page 1  Friday, April 20, 2007  3:28 PM

Summary of Contents for GRIZZLY 350 YFM35GX







































































































































Reviews:

No comments

Related manuals for GRIZZLY 350 YFM35GX

Brands by name

Popular brands

Load more brands