manualshive.com logo in svg

Yamaha GRIZZLY 350 YFM35FGDX, Owner'S Manual

Share
Download
Yamaha GRIZZLY 350 YFM35FGDX Owner'S Manual Download Page 28

4-8

4

Stop the ATV, move the differential gear lock lever
to position (a), and then push the differential gear
lock switch in to the “LOCK” position. When the dif-
ferential gear is locked, the differential gear lock in-
dicator light “

” comes on.

To release the differential gear lock, stop the ATV
and push the switch to the “4WD” position.

WARNING

EWB00130

Always stop the ATV before changing from
four-wheel drive to four-wheel-drive differen-
tial gear lock or vice-versa.
The ATV handles differently in four-wheel drive
than in differential gear lock in some circum-
stances. Changing from four-wheel drive to dif-
ferential gear lock or vice-versa while moving
may cause the ATV to handle differently unex-

1. Differential gear lock lever
2. On-Command four-wheel-drive switch “2WD”/“4WD”

1. On-Command differential gear lock switch “4WD”/“LOCK”

U4S261E0.book  Page 8  Friday, June 1, 2007  10:49 AM

Summary of Contents for GRIZZLY 350 YFM35FGDX

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands