manualshive.com logo in svg

Yamaha GRIZZLY 350 YFM350TE, Owner'S Manual, Page: 15 / 140

Share
Download
Yamaha GRIZZLY 350 YFM350TE Owner'S Manual Download Page 15

1-5

1

**.* kPa
*.** kgf/cm²

*.* psi

**.* kPa
*.** kgf/cm²

*.* psi

This pictogram shows trailer Hitch Tow 
weight limit. (Combined weight of the trailer 
and all cargo in the trailer.)
Overloading can cause loss of control.
Loss of control can result in severe injury or 
death.

This unit contains high-pressure nitrogen 
gas.
Mishandling can cause an explosion. Do not 
incinerate, puncture or open.

Use unleaded gasoline only.

Measure the tire pressure when the tires are 
cold.

Turning the ATV in 4WD-LOCK 
(“DIFF.LOCK”) takes more effort.
Operate at a slow speed and allow extra 
time and distance for maneuvers to avoid 
loss of control.

Adjust the tire pressure.
Improper tire pressure can cause loss of 
control.
Loss of control can result in severe injury or 
death.

This pictogram shows the loading limits 
and/or maximum load capacity for this ATV.
Follow all load limits and other loading 
guidelines in this manual.
Load may include the driver, passenger, 
human protective gear, accessories, goods, 
luggage, and all other load related items.
Make sure you do not exceed the load limits.
Overloading can cause loss of control.
Loss of control can result in severe injury or 
death.

This pictogram shows trailer Hitch Tongue 
weight limit. (Weight on the trailer tongue.)
Overloading can cause loss of control.
Loss of control can result in severe injury or 
death.

UB1460E0.book  Page 5  Friday, October 18, 2013  11:47 AM

Summary of Contents for GRIZZLY 350 YFM350TE













































































































































Reviews:

No comments