manualshive.com logo in svg

Yamaha GRIZZLY 350 YFM350FAZ, Owner'S Manual

The Yamaha GRIZZLY 350 YFM350FAZ is a rugged ATV designed for outdoor enthusiasts. With its powerful engine and durable construction, it can conquer any terrain. To ensure a smooth ride and proper maintenance, make sure to download the free Owner's Manual from manualshive.com to have access to all the necessary information and instructions.

Share
Download
background image

8-36

8

EBU28711

Checking and lubricating the front and 
rear brake levers 

The operation of the front and rear brake levers
should be checked before each ride, and the lever
pivots should be lubricated if necessary.

Front brake lever

Rear brake lever

EBU28832

Checking and lubricating the brake 
pedal 

The operation of the brake pedal should be
checked before each ride, and the pedal pivot
should be lubricated if necessary.

TIP

To access the brake pedal pivot, remove panel A.
(See page 8-9.)

Recommended lubricants:

Front brake lever:

Silicone grease

Rear brake lever:

Lithium-soap-based grease

Recommended lubricant:

Lithium-soap-based grease

U1AB60E0.book  Page 36  Wednesday, April 29, 2009  10:19 AM

Summary of Contents for GRIZZLY 350 YFM350FAZ















































































































































Reviews:

No comments

Related manuals for GRIZZLY 350 YFM350FAZ

Brands by name

Popular brands

Load more brands