Yamaha GRIZZLY 350 YFM350FAB Owner'S Manual Download | Manualshive

Page: 36 / 142

background image

4-11

4

3. Wipe up any spilled fuel immediately.

NOTICE: Immediately wipe off spilled fuel
with a clean, dry, soft cloth, since fuel may
deteriorate painted surfaces or plastic
parts.

[ECB00981]

4. Turn the fuel tank cap fully clockwise to make

sure it is securely closed.

WARNING

EWB02531

Gasoline is poisonous and can cause injury or
death. Handle gasoline with care. Never siphon
gasoline by mouth. If you should swallow
some gasoline or inhale a lot of gasoline vapor,
or get some gasoline in your eyes, see your

doctor immediately. If gasoline spills on your
skin, wash with soap and water. If gasoline
spills on your clothing, change your clothes.

NOTICE

ECB00070

Use only unleaded gasoline. The use of leaded
gasoline will cause severe damage to internal
engine parts, such as the valves and piston
rings, as well as to the exhaust system.

Your Yamaha engine has been designed to use
regular unleaded gasoline with a research octane
number of 91 or higher. If knocking (or pinging) oc-
curs, use a gasoline of a different brand. Use of un-
leaded fuel will extend spark plug life and reduce
maintenance costs.

EBU18820

Fuel cock

The fuel cock supplies fuel from the tank to the car-
buretor while also filtering it.
The fuel cock lever positions are explained as fol-
lows and shown in the illustrations.

Recommended fuel:

UNLEADED GASOLINE ONLY
For Europe: Regular unleaded gasoline only
with a research octane number of 91 or
higher

Fuel tank capacity:

13.5 L (3.57 US gal, 2.97 Imp.gal)

Fuel reserve amount:

3.3 L (0.87 US gal, 0.73 Imp.gal)

U1NS60E0.book Page 11 Monday, August 1, 2011 4:12 PM

«
...
34
35
36
37
38
...
»

Summary of Contents for GRIZZLY 350 YFM350FAB















































































































































Reviews:

No comments

Related manuals for GRIZZLY 350 YFM350FAB

Brand: Yerf-Dog Pages: 59

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands