E
3-25
EJU00508a
POST-OPERATION CHECKS
1)
After removing the vehicle from the
water, put the vehicle in the horizon-
tal position.
2)
Flush cooling system to prevent the
cooling system from clogging up with
salt, sand, or dirt. “Refer to pages 4-1
for the cooling system flushing proce-
dure”.
3)
Lubricate the internal components by
performing “LUBRICATION” at page
4-3, if storing the water vehicle for
more than a week.
4)
Drain residual water from the exhaust
system by alternately pulling and
releasing the throttle lever for a peri-
od of 10 to 15 seconds while the
engine is running.
c
C
Do not attempt to run the engine at full
throttle or for more than 15 seconds
while the vehicle is out of the water. The
engine may overheat and/or seize.
5)
After operating the vehicle from the
water, wash down the hull, handle-
bars and drive unit with fresh water.
GP7-070
