manualshive.com logo in svg

Yamaha GP800R WaveRunner 2005, Owner'S/Operator'S Manual

The 2005 Yamaha GP800R WaveRunner is an exhilarating personal watercraft designed for speed and agility on the open water. To ensure safe and optimal use, it is essential to have the Owner's/operator's manual at hand. Download the manual for free from manualshive.com, providing detailed instructions and guidelines.

Share
Download
background image

6-4

E

EJU01125 

Index

2-stroke engine oil................................... 3-2

A

Adjusting the carburetor ........................ 4-21
Adjusting the trolling speed ................... 4-21
Adjusting the Yamaha Adjustable 
Sponson (YAS) ..................................... 4-23
Approval label of Emission control 
certificate................................................. 1-2

B

Battery..............................................3-9, 4-5
Beaching the watercraft ........................ 3-32
Bilge ........................................................ 3-8
Bleeding the oil injection pump ............. 4-22
Boarding alone ...................................... 3-25
Boarding and starting in deep water ..... 3-25
Boarding with a passenger.................... 3-26
Bow down.............................................. 2-12
Bow up .................................................. 2-12

C

Capsized watercraft .............................. 3-27
Choke lever ............................................. 2-8
Cleaning and adjusting the 
spark plugs............................................ 4-14
Cleaning the jet intake and impeller ........ 5-4
Cleaning the watercraft ........................... 4-6
Connecting the jumper cables................. 5-6
Cooling water pilot outlet..............2-10, 3-14
Crossing ................................................ 1-15
Cruising limitations .................................. 1-8

D

Docking the watercraft .......................... 3-32

E

Emergency procedures ........................... 5-4
Emission control information ................... 1-2
Engine break-in ..................................... 3-15
Engine compartment ............................... 3-6
Engine overheat warning indicator........ 2-17
Engine overheat warning system .......... 2-13
Engine serial number .............................. 1-1
Engine shut-off cord (lanyard)............... 3-13

Engine shut-off switch ............................. 2-8
Engine stop switch .................................. 2-8
Enjoy your watercraft responsibly ......... 1-19

F

Filling the fuel tank .................................. 3-3
Filling the oil tank .................................... 3-4
Fire extinguisher.................................... 3-10
Fishing vessel right-of-way.................... 1-16
Flushing the cooling system .................... 4-1
Front storage compartment ................... 2-18
Fuel and oil.............................................. 3-1
Fuel and oil systems ............................... 3-7
Fuel cock knob ........................................ 2-7
Fuel filter ............................................... 4-11
Fuel meter ............................................. 2-16
Fuel system ............................................. 4-4
Fuel tank ............................................... 4-11
Fuel tank filler cap ................................... 2-6
Fuel warning indicator ........................... 2-17

G

Gasohol ................................................... 3-2
Gasoline .................................................. 3-1
Getting to know your watercraft ............ 3-21
Give-way vessel .................................... 1-14
Glove compartment ............................... 2-19

H

Handgrip................................................ 2-12
Hazard information ................................ 1-12
Hood........................................................ 2-6
Hour meter ............................................ 2-16
Hull and deck .......................................... 3-6
Hull Identification Number (HIN).............. 1-1

I

Identification numbers ............................. 1-1
Important labels....................................... 1-3
Inspecting and adjusting the throttle 
cable...................................................... 4-13
Inspecting the battery ............................ 4-19
Inspecting the fuel system..................... 4-10
Inspecting the jet thrust nozzle angle .... 4-13
Inspecting the oil injection system......... 4-12
Inspecting the Yamaha Power 
Valve System (YPVS) ........................... 4-15

UF0W14.book  Page 4  Thursday, June 17, 2004  2:16 PM

Summary of Contents for GP800R WaveRunner 2005



























































































































Reviews:

No comments

Related manuals for GP800R WaveRunner 2005

Pro-Line Boats 2007 25 Walk Owner'S Manual preview
2007 25 Walk
Brand: Pro-Line Boats Pages: 71
BIC Sport yakkair User Manual preview
yakkair
Brand: BIC Sport Pages: 12
Cobalt Digital Inc 24SD Owner'S Manual preview
24SD
Brand: Cobalt Digital Inc Pages: 136
Boston Whaler 13' Super Sport Owner'S Manual preview
13' Super Sport
Brand: Boston Whaler Pages: 24
Boston Whaler 190 Outrage User Manual preview
190 Outrage
Brand: Boston Whaler Pages: 88
Boston Whaler 150 Super Sport Owner'S Manual preview
150 Super Sport
Brand: Boston Whaler Pages: 82
Mercury 10 Marathon User Manual preview
10 Marathon
Brand: Mercury Pages: 94
Grady-White Boats Chesapeake 290 Owner'S Manual preview
Chesapeake 290
Brand: Grady-White Boats Pages: 105
Grady-White Boats Canyon 336 Owner'S Manual preview
Canyon 336
Brand: Grady-White Boats Pages: 126
Malibu Boats 2 MXZ User Manual preview
2 MXZ
Brand: Malibu Boats Pages: 206
Nautiraid Narak 460 Instruction Book preview
Narak 460
Brand: Nautiraid Pages: 12
Nautiraid Narak Cross 475 Instruction Book preview
Narak Cross 475
Brand: Nautiraid Pages: 20
Tayana VANCOUVER 42 Operation And Maintenance Manual preview
VANCOUVER 42
Brand: Tayana Pages: 70
Malibukayaks Pro 2 Tandem Owner'S Manual preview
Pro 2 Tandem
Brand: Malibukayaks Pages: 17
Yamaha 210FSH SPORT 2022 Operator'S Manual preview
210FSH SPORT 2022
Brand: Yamaha Pages: 146
Yamaha XLT1200 WaveRunner 2002 Owner'S/Operator'S Manual preview
XLT1200 WaveRunner 2002
Brand: Yamaha Pages: 142
Speed Sails Merlin Rocket Manual preview
Merlin Rocket
Brand: Speed Sails Pages: 3
Speed Sails Enterprise Tuning Manual preview
Enterprise
Brand: Speed Sails Pages: 3

Brands by name

Popular brands

Load more brands