PERIODIC MAINTENANCE AND ADJUSTMENT
7-35
7
EAU24115
Replacing the tail/brake light
bulb
1. Remove the passenger seat. (See
2. Remove the tail/brake light bulb
socket (together with the bulb) by
turning it counterclockwise.
3. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
4. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
5. Install the socket (together with the
bulb) by turning it clockwise.
6. Install the passenger seat.
EAU43003
Replacing a turn signal light
bulb
1. Remove the turn signal light unit
by removing the screw.
2. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
3. Remove the burnt-out bulb by pull-
ing it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with the
bulb) by turning it clockwise.
6. Install the turn signal light unit by
installing the screw.
1. Tail/brake light bulb socket
1. Turn signal light unit
2. Screw
1. Turn signal light bulb socket
1. Turn signal light bulb
U1CA11E0.book Page 35 Thursday, September 23, 2010 11:51 AM
