PERIODIC MAINTENANCE AND MINOR REPAIR
6-47
6
Engine overheating
EW000070
WARNING
_
●
Do not remove the radiator cap when the engine and radiator are hot. Scalding hot fluid and steam may be
blown out under pressure, which could cause serious injury. Be sure to wait until the engine has cooled.
●
After removing the radiator cap retaining bolt, place a thick rag, like a towel, over the radiator cap, and then
slowly rotate the cap counterclockwise to the detent to allow any residual pressure to escape. When the hiss-
ing sound has stopped, press down on the cap while turning it counterclockwise, and then remove the cap.
_
NOTE:
_
If coolant is not available, tap water can be temporarily used instead, provided that it is changed to the recommended coolant
as soon as possible.
_
Wait until the
engine has cooled.
Check the coolant level in the
reservoir and radiator.
The coolant level
is OK.
The coolant level is low.
Check the cooling system
for leakage.
Have a Yamaha dealer check
and repair the cooling system.
Add coolant. (See NOTE.)
Start the engine. If the engine overheats again,
have a
Yamaha dealer check and repair the cooling system.
There is
leakage.
There is
no leakage.
E_5lv.book Page 47 Tuesday, August 28, 2001 4:40 PM
Summary of Contents for FZS1000P
Page 2: ...EAU03438 ...
Page 106: ...SPECIFICATIONS 8 Specifications 8 1 E_5lv book Page 1 Tuesday August 28 2001 4 40 PM ...
Page 119: ...CONSUMER INFORMATION 9 8 9 E_5lv book Page 8 Tuesday August 28 2001 4 40 PM ...
Page 121: ...CONSUMER INFORMATION 9 10 9 E_5lv book Page 10 Tuesday August 28 2001 4 40 PM ...