INSTRUMENT AND CONTROL FUNCTIONS
4-17
4
EAU47351
Helmet holder
The helmet holder is located under the
passenger seat. A helmet holding cable
is provided in the owner’s tool kit to se-
cure a helmet to the helmet holder.
To secure a helmet to the helmet
holder
1. Remove the passenger seat. (See
2. Pass the helmet holding cable
through the buckle on the helmet
strap as shown, and then hook the
cable loops over the helmet hold-
er.
3. Place the helmet on the right side
of the vehicle, and then install the
passenger seat.
WARNING! Nev-
er ride with a helmet attached to
the helmet holder, since the hel-
met may hit objects, causing
loss of control and possibly an
accident.
[EWA10161]
To release the helmet from the hel-
met holder
Remove the passenger seat, remove
the helmet holding cable from the hel-
met holder and the helmet, and then in-
stall the passenger seat.
EAU14463
Storage compartment
The storage compartment is located
under the passenger seat. (See page
4-13.)
When storing the Owner’s Manual or
other documents in the storage com-
partment, be sure to wrap them in a
plastic bag so that they will not get wet.
When washing the vehicle, be careful
not to let any water enter the storage
compartment.
WARNING
EWA10961
●
Do not exceed the load limit of 3
kg (7 lb) for the storage com-
partment.
1. Helmet holder
2. Owner’s tool kit
3. Helmet holding cable
3
1
2
1. Helmet
2. Helmet holding cable
3. Helmet holder
1
2
3
1. Storage compartment
1
U36P13E0.book Page 17 Tuesday, July 5, 2011 8:45 AM
