PERIODIC MAINTENANCE AND ADJUSTMENT
7-28
7
EAU22731
Changing the brake fluid
Have a Yamaha dealer change the
brake fluid at the intervals specified in
the TIP after the periodic maintenance
and lubrication chart. In addition, have
the oil seals of the master cylinders and
calipers as well as the brake hoses re-
placed at the intervals listed below or
whenever they are damaged or leak-
ing.
●
Oil seals: Replace every two
years.
●
Brake hoses: Replace every four
years.
EAU22760
Drive chain slack
The drive chain slack should be
checked before each ride and adjusted
if necessary.
EAU22774
To check the drive chain slack
1. Place the motorcycle on the side-
stand.
TIP
When checking and adjusting the drive
chain slack, there should be no weight
on the motorcycle.
2. Shift the transmission into the neu-
tral position.
3. Measure the drive chain slack as
shown.
4. If the drive chain slack is incorrect,
adjust it as follows.
EAU47033
To adjust the drive chain slack
Consult a Yamaha dealer before ad-
justing the drive chain slack.
1. Loosen the locknut at each end of
the swingarm, and then loosen the
axle nut.
2. To tighten the drive chain, turn the
drive chain slack adjusting nut at
each end of the swingarm in direc-
tion (a). To loosen the drive chain,
turn the adjusting nut at each end
of the swingarm in direction (b),
and then push the rear wheel for-
ward.
NOTICE:
Improper drive
Drive chain slack:
45.0–55.0 mm (1.77–2.17 in)
1. Drive chain slack
1
U36P12E0.book Page 28 Monday, October 25, 2010 5:21 PM
Summary of Contents for FZ6RA
Page 11: ...LOCATION OF IMPORTANT LABELS 1 4 1 1 U36P12E0 book Page 4 Monday October 25 2010 5 21 PM ...
Page 114: ...A5 yoko_Blank fm Page 1 Tuesday April 8 2003 11 43 AM ...
Page 115: ...A5 yoko_Blank fm Page 1 Tuesday April 8 2003 11 43 AM ...
Page 116: ...PRINTED IN JAPAN 2010 11 0 6 1 CR E PRINTED ON RECYCLED PAPER YAMAHA MOTOR CO LTD DIC183 ...