Yamaha FZ6R, Owner'S Manual

Page: 35 / 116

INSTRUMENT AND CONTROL FUNCTIONS
4-15
4
2. Install the passenger seat.
TIP
●
Make sure that the seats are prop-
erly secured before riding.
●
The rider seat height can be ad-
justed to change the riding posi-
tion. (See the “Adjusting the rider
seat height” section.)
EAU47450
Adjusting the rider seat height
The rider seat height can be adjusted to
one of two positions to suit the rider’s
preference.
The rider seat height was adjusted to
the lower position at delivery.
To change the rider seat height to
the high position
1. Remove the passenger and rider
seats. (See page 4-14.)
2. Remove the rider seat height posi-
tion adjuster by removing the ad-
juster bolts.
3. Install the rider seat height position
adjuster so that its bolt holes
marked “H” are aligned with the
bolt holes of the adjuster brackets,
and then install the adjuster bolts.
1. Seat holder
2. Projection
1
2
1. Low position
2. High position
1 2
1. Rider seat height position adjuster
2. Adjuster bolt
1. Rider seat height position adjuster
2. “H” mark
3. Adjuster bracket
1 2
1
3
2
U36P12E0.book Page 15 Monday, October 25, 2010 5:21 PM