Yamaha FZ-07 Owner'S Manual Download Page 31

Page: 31 / 106

INSTRUMENT AND CONTROL FUNCTIONS

3-16

NOTICE

ECA20100

Be careful not to

ama

e the wheel

sensor or wheel sensor rotor; other-
wise, improper performance of the
ABS will result.

EAU13075

Fuel tank cap

To open the fuel tank cap

Open the fuel tank cap lock cover, in-
sert the key into the lock, and then turn
it 1/4 turn clockwise. The lock will be
released and the fuel tank cap can be
opened.

To close the fuel tank cap

1. Push the fuel tank cap into posi-

tion with the key inserted in the
lock.

2. Turn the key counterclockwise to

the original position, remove it,
and then close the lock cover.

1. Front wheel sensor
2. Front wheel sensor rotor

1. Rear wheel sensor
2. Rear wheel sensor rotor

1. Unlock.
2. Fuel tank cap lock cover

U1WSE0E0.book Page 16 Wednesday, November 13, 2013 10:28 AM

Summary of Contents for FZ-07











































































































Search results

Summary of Contents for FZ-07

Reviews:

Related manuals for FZ-07

Brands by name

Popular brands

Yamaha FZ-07, Owner'S Manual

Search results

Summary of Contents for FZ-07

Reviews:

Related manuals for FZ-07

Brands by name

Popular brands