manualshive.com logo in svg

Yamaha FxNytro FX10M53SZ, Owner'S Manual

Share
Download
Yamaha FxNytro FX10M53SZ Owner'S Manual Download Page 17

Control functions

11

TIP

If the T.O.R.S. is activated, the warning light
and self-diagnosis warning indicator will flash,
and the two-digit code “84” will flash in the
meter display. If this occurs, have a Yamaha
dealer check the system as soon as possible.

ESU12722

Speedometer unit 

The speedometer unit is equipped with the
following:

●

a digital speedometer

●

an odometer

●

a tripmeter (which shows the distance trav-
eled since it was last set to zero)

●

an engine speed meter (which shows the
engine speed; not for use while riding)

●

warning indicators (which show self-diag-
nosis, coolant temperature, fuel level, and
oil level warnings)

●

indicator lights (which show high beam and
low coolant temperature conditions)

●

a warning light (which shows warnings to-
gether with the warning indicators)

●

a fuel meter (which shows the fuel remain-
ing in the fuel tank)

●

a grip/thumb warmer level indicator (which
shows the grip warmer or the thumb warm-
er level)

When the key is turned to the on position, the
warning light, the low coolant temperature in-
dicator light, and all segments of the meter
display come on and go off.
The grip warmer level is initially displayed for
5 seconds, then the display switches to the
fuel meter.

Odometer, tripmeter, and engine 
speed meter modes

Pushing the “SELECT” button switches the
display between the odometer mode “ODO”,
tripmeter mode “TRIP”, and engine speed
meter mode “r/min” in the following order:
ODO 

→

 TRIP 

→

 r/min 

→

 ODO

To reset the tripmeter, push the “RESET” but-
ton for at least 1 second while the tripmeter is
displayed.

1. Warning light “

”

2. Self-diagnosis warning indicator “

”

3. Two-digit code “84”

1. Meter display
2. High beam indicator light “

”

3. Low coolant temperature indicator 

light “

”

4. Warning light “

”

5. “RESET” button

6. “SELECT” button

4 3 2

1

6

5

U8HK11E0.book  Page 11  Thursday, April 9, 2009  8:43 AM

Summary of Contents for FxNytro FX10M53SZ





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands