manualshive.com logo in svg

Yamaha FX SHO, Owner'S Manual, Page: 37 / 118

Share
Download
Yamaha FX SHO Owner'S Manual Download Page 37

Features and functions

32

System” on page 39 for information on using
the remote control transmitter.)

The Yamaha Security System and low-RPM
mode settings can only be selected using the
remote control transmitter.
Store the remote control transmitter carefully
so it will not be lost. When operating the wa-
tercraft, store the transmitter in the transmitter
holder provided in the watertight compart-
ment.

NOTICE

ECJ00751

●

The remote control transmitter is not
completely waterproof. Do not sub-
merge the transmitter or operate it un-
derwater. If the transmitter is
submerged, dry it with a soft, dry cloth,
and then check that it is operating prop-
erly. If the transmitter is not operating
properly, contact a Yamaha dealer.

●

Keep the remote control transmitter
away from high temperatures and do not
place it in direct sunlight.

●

Do not drop the remote control transmit-
ter, subject it to strong shocks, or place
any heavy items on it.

●

Use a soft, dry cloth to clean the remote
control transmitter. Do not use deter-
gent, alcohol, or other chemicals.

●

Do not attempt to disassemble the re-
mote control transmitter yourself. Other-
wise, the transmitter may not operate
properly. If the transmitter needs a new
battery, contact a Yamaha dealer.

TIP:

●

While the engine is running, input from the
remote control transmitter is not received.

●

If you accidentally lose your remote control
transmitter, contact a Yamaha dealer.

This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including in-
terference that may cause undesired opera-
tion.

NOTICE

ECJ00030

Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authori-
ty to operate the remote control transmit-
ter.

1

Transmitter holder

1

UF1W11E0.book  Page 32  Tuesday, May 27, 2008  8:50 AM

Summary of Contents for FX SHO























































































































Reviews:

No comments