Yamaha FX Nytro FX10X, Owner'S Manual

Page: 24 / 92

Control functions
18
ESU13030
Shift lever (FX10 / FX10RTR /
FX10RTRA / FX10MTR /
FX10MTRA)
The shift lever is used to put the snowmobile
into forward or reverse. Before shifting, wait
for the snowmobile to come to a complete
stop with the engine idling. Pull the shift lever
out, slide it to “FWD” or to “REV” until it stops,
and then push it back in.
CAUTION:
ECS00070
Do not shift from “FWD” to “REV” or from
“REV” to “FWD” while the snowmobile is
moving. Otherwise, the drive system
could be damaged.
ESU10720
Shroud and covers
Securely fasten the shroud and covers before
operating the snowmobile. (See page 43 for
removal and installation procedures.)
1. Shift lever
1. Pull out.
2. Slide to “FWD” (forward).
3. Push in.
1. Pull out.
2. Slide to “REV” (reverse).
3. Push in.
1. Shroud
2. Right side cover
U8GL10E0.book Page 18 Friday, May 18, 2007 3:17 PM