Operation
31
the engine from starting except when in neu-
tral.
2.
Attach the engine shut-off cord to a se-
cure place on your clothing, or your arm
or leg. Then install the clip on the other
end of the cord into the engine shut-off
switch.
WARNING
EWM00121
●
Attach the engine shut-off cord to a se-
cure place on your clothing, or your
arm or leg while operating.
●
Do not attach the cord to clothing that
could tear loose. Do not route the cord
where it could become entangled, pre-
venting it from functioning.
●
Avoid accidentally pulling the cord dur-
ing normal operation. Loss of engine
power means the loss of most steering
control. Also, without engine power,
the boat could slow rapidly. This could
cause people and objects in the boat to
be thrown forward.
3.
Place the throttle grip in the “
”
(start) position.
4.
Pull the manual starter handle slowly un-
til you feel resistance. Then give a
strong pull straight out to crank and start
the engine. Repeat if necessary.
5.
After the engine starts, slowly return the
manual starter handle to its original po-
sition before releasing it.
NOTE:
●
When the engine is cold, it needs to be
warmed up. For further information, see
page 33.
●
If the engine is warm and fails to start,
open the throttle slightly and try to start the
engine again. If the engine still fails to
start, see page 72.
6.
Slowly return the throttle grip to the fully
closed position.
EMU27663
Electric start and remote control models
1.
Place the remote control lever in neutral.
ZMU02026
START
START
ZMU02335
ZMU02336
