Yamaha FreeGo LTK125 2019 Owner'S Manual Download

Page: 69 / 84

Perio

ic maintenance an

justment

7-28

EAU64070

Hea

hts

This model is equipped with LED-type
headlights.
If a headlight does not come on, have
a Yamaha dealer check its electrical
circuit.

NOTICE

ECA16581

Do not affix any type of tinte

film or

stickers to the hea

ht lens.

EAU43234

Replacin

an auxiliary li

This model is equipped with two auxil-
iary lights. If an auxiliary light bulb
burns out, replace it as follows.

1. Remove the auxiliary light bulb

socket (together with the bulb) by
pulling it out.

2. Remove the burnt-out bulb by

pulling it out.

3. Insert a new bulb into the socket.
4. Install the socket (together with

the bulb) by pushing it in.

EAU52323

Replacin

a front turn si

nal

1. Remove the turn signal light bulb

socket (together with the bulb) by
turning it counterclockwise.

2. Remove the burnt-out bulb by

pushing it in and turning it coun-
terclockwise.

3. Insert a new bulb into the socket,

push it in, and then turn it clock-
wise until it stops.

4. Install the socket (together with

the bulb) by turning it clockwise.

1. Auxiliary light bulb socket

1. Turn signal light bulb socket

UB0PE0E0.book Page 28 Wednesday, October 17, 2018 8:48 AM

Summary of Contents for FreeGo LTK125 2019





















































































Search results

Summary of Contents for FreeGo LTK125 2019

Reviews:

Related manuals for FreeGo LTK125 2019

Brands by name

Popular brands

Yamaha FreeGo LTK125 2019, Owner'S Manual

Search results

Summary of Contents for FreeGo LTK125 2019

Reviews:

Related manuals for FreeGo LTK125 2019

Brands by name

Popular brands