Yamaha FJR13AV(C) Owner'S Manual Download Page 29 | Manualshive

Page: 29 / 111

background image

INSTRUMENT AND CONTROL FUNCTIONS

3-11

3

EAU12870

Shift pedal

The shift pedal is located on the left
side of the engine and is used in com-
bination with the clutch lever when
shifting the gears of the 5-speed con-
stant-mesh transmission equipped on
this motorcycle.

EAU26822

Brake lever

The brake lever is located at the right
handlebar grip. To apply the front
brake, pull the lever toward the handle-
bar grip.

The brake lever is equipped with a po-
sition adjusting dial. To adjust the dis-
tance between the brake lever and the
handlebar grip, turn the adjusting dial
while holding the lever pushed away
from the handlebar grip. Make sure that
the appropriate setting on the adjusting
dial is aligned with the “

” mark on the

brake lever.

EAU39540

Brake pedal

The brake pedal is on the right side of
the vehicle.
This model is equipped with a unified
brake system.
When pressing down on the brake ped-
al, the rear brake and a portion of the
front brake are applied. For full braking
performance, apply both the brake le-
ver and the brake pedal simultaneous-
ly.

1. Shift pedal

1. Brake lever

2. “

” mark

3. Brake lever position adjusting dial
4. Distance between brake lever and handlebar

grip

1. Brake pedal

U3P610E0.book Page 11 Thursday, December 22, 2005 11:16 AM

«
...
27
28
29
30
31
...
»

Summary of Contents for FJR13AV(C)
















































































































Reviews:

No comments

Related manuals for FJR13AV(C)

Brand: Garmin Pages: 12

Brand: Garmin Pages: 13

Brand: Zero88 Pages: 26

Brand: HAMOKI Pages: 7

Brand: H&S Pages: 56

Brand: Össur Pages: 98

Flex Foot Cheetah

Brand: Össur Pages: 107

Brand: Össur Pages: 38

Brand: Össur Pages: 39

Bionic Symbionic Leg

Brand: Össur Pages: 2

Brand: Össur Pages: 67

Brand: Össur Pages: 17

Brand: Daihan Scientific Pages: 27

WEEDDEVIL ST-97

Brand: R+M Suttner Pages: 16

Brand: Viking Pages: 6

Brand: Airway Pages: 2

Brand: Crazy Foil Pages: 8

Brand: AS MOTOR Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands