Yamaha FJR1300N, Owner'S Manual

Page: 47 / 50

OPERATION AND IMPORTANT RIDING POINTS
5-2
5
NOTE:
_
If the engine fails to start, release the
start switch, wait a few seconds, and
then try again. Each starting attempt
should be as short as possible to pre-
serve the battery. Do not crank the en-
gine more than 10 seconds on any one
attempt.
_
ECA00045
CAUTION:
_
For maximum engine life, never ac-
celerate hard when the engine is
cold!
_
NOTE:
_
The engine is warm when it quickly re-
sponds to the throttle.
_
EAU00423
Shifting
Shifting gears lets you control the
amount of engine power available for
starting off, accelerating, climbing hills,
etc.
The gear positions are shown in the
illustration.
NOTE:
_
To shift the transmission into the neu-
tral position, press the shift pedal down
repeatedly until it reaches the end of its
travel, and then slightly raise it.
_
EC000048
CAUTION:
_
●
Even with the transmission in
the neutral position, do not
coast for long periods of time
with the engine off, and do not
tow the motorcycle for long dis-
tances. The transmission is
properly lubricated only when
the engine is running. Inade-
quate lubrication may damage
the transmission.
●
Always use the clutch while
changing gears to avoid dam-
aging the engine, transmission,
and drive train, which are not
designed to withstand the
shock of forced shifting.
_
1. Shift pedal
N. Neutral position
E_5jw.book Page 2 Friday, March 30, 2001 2:14 PM